Chapter 1
HAProxy stands for High Availability Proxy which is a TCP/HTTP load balancer and proxy server which allows a web server to spread incoming requests across multiple endpoints.
It is used when too many concurrent connections are requested on a single cloud hosting (https://www.hostingraja.in/)server. Using HAProxy, It allows a client connecting to a single server that handles all of the requests, the client will be connected to an HAProxy instance that will use a reverse proxy to forward the requests to the available endpoints using the load-balancing algorithm.HAProxy to select the server when doing the load balancing it uses balance Algorithm The Source, Round Robin and Lastconn modes are available.
Round Robin is a simple balance algorithm on the new connection it handles the next backend server and when the last backend server is reached, it will once again start from the top of the backend list.
Lastconn, on a new connection, the backend server(http://mariechatfield.com/tutorials/explanations/backend.html)with least amount of connections will handle the new connection.
Source,it is used for sticky sessions, that is it has the client IP to determine the backend server that received the last request from this IP.
HAProxy also supports various features like SSL (https://www.ssl.com/faqs/faq-what-is-ssl/) compressions, keep-alive, custom log formats, and header rewriting.
An haproxy server is a fast and lightweight and also the load balancer uses a small memory and CPU usage is low. This is used by many large sites and has become popular software load balancer and proxy server.
Here, we will see we will guide to install and configure HAproxy on 3 servers where one server act as a load balancer where the HAProxy will be installed and configured (HAproxy will act as a load balancer), while the other two as nginx servers where the Nginx web server will be installed and configured.
The below are the steps to configure HAproxy on three servers:
Requirements:3 servers with root access
In this case, the 3 servers are:
Server Name : ServerLB
Server IP: 10.12.17.31
Server Name : Server_1
Server IP: 10.12.17.32
Server Name : server_ 2
Server IP: 10.12.17.33
Here, we take serverLB as loadbalancer and server_1 & server_2 as nginx server
Step 1 : Basic setup of the servers:Configure the /etc/hosts files
Step 1.1: Login into ServerLB
Step 1.2: To ensure you are working in root session
sudo su
Step 1.3: In vi /etc/hosts
add the hostnames:
10.12.17.31 ServerLB ser1
10.12.17.32 Server_1 ser2
10.12.17.33 Server_2 ser3
Step 1.4: Save the file and exit the editor. (To save the changes use wq to write and quit)
Step 1.5: Now you should edit host file for server_1
Step 1.6: In vi /etc/hosts
add the hostnames:
10.12.17.31 ServerLB ser1
10.12.17.32 Server_1 ser2
10.12.17.33 Server_2 ser3
Step 1.7: Save the file and exit the editor. (To save the changes use wq to write and quit)
Step 1.8: Now you should edit host file for server_1
Step 1.9: In vi /etc/hosts
add the hostnames:
10.12.17.31 ServerLB ser1
10.12.17.32 Server_1 ser2
10.12.17.33 Server_2 ser3
Step 1.10: Save the file and exit the editor. (To save the changes use wq to write and quit)
Step 2 : Now in this step you have to Install and Configure HAProxy
Step 2.1: In ServerLB
Step 2.2: yum -y update
Step 2.3: yum -y install haproxy
Step 2.4: go to the “/etc/haproxy/” d
cd /etc/haproxy/
Step 2.5:Backup the original configuration file
mv haproxy.cfg haproxy.cfg.orig
Step 2.6:create a new haproxy.cfg and add the below code, modification accordingly
vi haproxy.cfg
Paste the below:
#---------------------------------------------------------------------
# Global settings
#---------------------------------------------------------------------
global
log 127.0.0.1 local2 #Log configuration
chroot /var/lib/haproxy
pidfile /var/run/haproxy.pid
maxconn 4000
user haproxy #Haproxy running under user and group “haproxy”
group haproxy
daemon
# turn on stats unix socket
stats socket /var/lib/haproxy/stats
#---------------------------------------------------------------------
# common defaults that all the ‘listen’ and ‘backend’ sections will
# use if not designated in their block
#---------------------------------------------------------------------
defaults
mode http
log global
option httplog
option dontlognull
option http-server-close
option forwardfor except 127.0.0.0/8
option redispatch
retries 3
timeout http-request 10s
timeout queue 1m
timeout connect 10s
timeout client 1m
timeout server 1m
timeout http-keep-alive 10s
timeout check 10s
maxconn 3000
#---------------------------------------------------------------------
#HAProxy Monitoring Config
#---------------------------------------------------------------------
listen haproxy3-monitoring *:8080 #Haproxy Monitoring run on port 8080
mode http
option forwardfor
option httpclose
stats enable
stats show-legends
stats refresh 5s
stats uri /stats #URL for HAProxy monitoring
stats realm Haproxy\ Statistics
stats auth howtoforge:howtoforge #User and Password for login to the monitoring dashboard
stats admin if TRUE
default_backend app-main #This is optionally for monitoring backend
#---------------------------------------------------------------------
# FrontEnd Configuration
#---------------------------------------------------------------------
frontend main
bind *:80
option http-server-close
option forwardfor
default_backend app-main
#---------------------------------------------------------------------
# BackEnd roundrobin as balance algorithm
#---------------------------------------------------------------------
backend app-main
balance roundrobin #Balance algorithm
option httpchk HEAD / HTTP/1.1\r\nHost:\ localhost #Check the server application is up and healty - 200 status code
server ser2 10.12.17.32:80 check #server2
server ser3 10.12.17.33:80 check #server3
Save the configuration file and exit. (To save the changes use wq to write and quit)
We will configure the rsyslog daemon to log the HAProxy statistics. Edit the rsyslog.conf file to enable the UDP port 514 to be used by rsyslog.
Step 3 :To configure the rsyslog daemon to log the HAproxy statistics ,for that we will need to edit rsyslog.conf file in which we need to enable the UDP port 514 to be used by rsyslog
Now in this step you have to Install and Configure HAProxy
Step 3.1: In vi /etc/rsyslog.conf
$ModLoad imudp
$UDPServerRun 514
If you need to use a specific IP, You can add a the below line the your desired local IP
$UDPServerAddress 127.0.0.1
Save the changes which you have made and exit. (To save the changes use wq to write and quit)
Step 3.2: Next , you have to create a new HAproxy.conf
local2.=info /var/log/haproxy-access.log #For Access Log
local2.notice /var/log/haproxy-info.log #For Service Info - Backend, loadbalancer
Save the changes and exit. (To save the changes use wq to write and quit)
Step 3.3: And now we need to restart the rsyslog and then start the HAproxy
systemctl restart rsyslog
systemctl start haproxy
You need to add HAproxy to start at boot time in HAproxy.conf
systemctl enable haproxy
Step 4 - Installing and Configuring Nginx
we need to install Nginx from epel repository on server_1 and Server_2 server.
Step 4.1:Log in to the servers:
Install the epel repository with the yum command below:
Step 4.1.1: yum -y install epel-release
Step 4.1.2:Now you can install Nginx:
yum -y install nginx
Step 4.1.3: Nginx is installed.
Go to the web directory and change the index file so that we can see which of the two servers delivered the html file:
cd /usr/share/nginx/html/
echo “<h1>v1.loadbalance.me</h1>” > index.html #For nginx server1
Step 4.1.4:Next, add Nginx to start at boot time in HAproxy.conf and then start:
systemctl enable nginx
Step 4.1.5: start the server
systemctl start nginx
Step 4.2:Log in to the servers:
Install the epel repository with the yum command below:
Step 4.2.1: yum -y install epel-release
Step 4.2.2:Now you can install Nginx:
yum -y install nginx
Step 4.1.3: Nginx is installed.
Go to the web directory and change the index file so that we can
see which of the two servers delivered the html file:
cd /usr/share/nginx/html/
echo “<h1>v1.loadbalance.me</h1>” > index.html #For nginx server2
Step 4.1.4:Next, add Nginx to start at boot time in HAproxy.conf and then start:
systemctl enable nginx
Step 4.1.5: start the server
systemctl start nginx
Step 5 :Testing
For testing using the browser by accessing the load balancer IP: 10.12.17.31
Request handled by Nginx- server 2
Request handled by Nginx- server 1
You can also test it using the curl command:
[root@xyz-1 rsyslog.d]# curl 10.12.17.31
<h1>v2.loadbalance.me</h1>
[root@xyz-1 rsyslog.d]# curl 10.12.17.31
<h1>v1.loadbalance.me</h1>
[root@xyz-1 rsyslog.d]# curl 10.12.17.31
<h1>v2.loadbalance.me</h1>
[root@xyz-1 rsyslog.d]# curl 10.12.17.31
<h1>v1.loadbalance.me</h1>
[root@xyz-1 rsyslog.d]# curl 10.12.17.31
<h1>v2.loadbalance.me</h1>
[root@xyz-1 rsyslog.d]# curl 10.12.17.31
<h1>v1.loadbalance.me</h1>
[root@xyz-1 rsyslog.d]# curl 10.12.17.31
<h1>v2.loadbalance.me</h1>





![His Luna Queen [Discontinued]](https://cdn-gcs.inkitt.com/vertical_storycovers/ipad_31ca7c3fb8cb023d576c297a7081cb10.jpg?width=1920&quality=75)



